EN
Hot melt adhesive tape, very easy to use, can be used to fix many things together. But this tape is extremely sensitive and makes common errors when you use it incorrectly, which could lead to issues down the road. In addition, below are some of the common mistakes you can avoid while using a BANQ INTERLINING hot melt adhesive tape:
Choosing the Right Tape
If you are using a hot melt adhesive tape, it is important to know what type of tape you need and when to use the right one. Sure enough, there are all kinds of tape, and each comes with its own merits and features. As a result, some tapes are better suited for certain materials than others. If you choose the wrong tape by mistake, it might not stick correctly or even damage the materials which you join together. Take a few seconds to check the manufacturers instructions to make sure you are using the right tape. This way you know exactly which tape is the best for your particular project.
Cleaning the Surface
Cleaning before applying: Another common mistake people make is forgetting to clean the surface on which they are going to apply the hot melt adhesive tape. Dust, dirt and little pieces of debris can interfere and keep the tape from sticking properly. If the surface is not clean, then there is a weak bond that might not last. So make sure to clean the surface well before using the tape. That translates to cleaning it to make sure there are no dust or dirt particles. This will allow the tape to adhere better which will give your bonding a lot more strength.
Applying the Right Pressure
Another mistake that is often made is applying too much or too little pressure when you are applying the tape. It is also critical therefore to apply just enough pressure so the adhesive sticks well. If you push down too hard, you could damage the tape and/or anything you are working with and that can be problematic. If you don’t press too hard, on the other hand, the bond might not be strong enough to stay together. When applying the tape, take your time and be gradual while pressing evenly. And the latest technology will help you get the most from your project.
Storing the Tape Properly
Fifthly, an important error to avoid here is failing to store the tape in an appropriate manner. In order for your hot melt adhesive tape to work correctly every time when you need it, you need to store it properly. Store the tape in a dry, cool place, away from direct sunlight. Heat and prolonged exposure to the sun can make the tape work less effectively than it should. Then, treat the tape with respect and store it in a safe location.